Installation of Ucrete

Ucrete HF is a three-component polyurethane-concrete flooring system. This troweled, monolithic flooring system is installed from 1/4 – 3/8" (6 – 9.5 mm) or greater. The thickness is determined by the service and cleaning temperatures and the severity of traffic expected. Ucrete HF floors are extremely tough and have many physical properties that exceed those of typical concrete.

Ucrete HP and HP/Q are three-component polyurethane-concrete systems with a broadcast aggregate. Both of these systems are installed at a finished thickness of 1/4 – 3/8" (6 – 9 mm). The thickness is determined by the service and cleaning temperatures and the severity of traffic expected. Ucrete HP/Q uses a colored quartz aggregate to yield a textured surface. Ucrete HP uses a translucent quartz aggregate. Ucrete floors are extremely tough and have many physical properties that exceed those of typical concrete.

Ucrete WR is a three-component polyurethane-concrete material. It is used with other Ucrete® products to form cove bases. Ucrete WR applies by trowel and yields excellent results; it can be installed to a depth of 1/8" (3 mm) in a single lift or to greater thicknesses in multiple lifts. It is extremely tough and has many physical properties that exceed those of typical concrete.